32.000MHZ
SMD2520 12PF Passive Crystal Oscillator 10PPM Modular Crystal
Oscillator
product application
1 , WiFi Bluetooth module;
2 , Toys;
3 , Mobile phone
product features
The function of crystal oscillator is to provide basic clock signal
for the system. Generally, one system shares one crystal oscillator
to keep the parts synchronized. Some communication systems have
different fundamental frequencies and radio frequencies using
different oscillators, while maintaining synchronization by
electronically adjusting the frequency.
The crystal oscillator is usually used in conjunction with the PLL
circuit to provide the clock frequency required by the system. If
different subsystems require clock signals of different
frequencies, different phase-locked loops connected to the same
crystal oscillator can be used to provide them.
Standard Environmental Condition:
Environmental Temperature:15℃~35℃
Humidity:45%~85%
Atmospheric pressure:86~106KPa
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following
conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
Mechanical property test:
The test can be measured after 1 hours of rest at the reference
temperature
Dropping Test:
The Units are measured for its frequency and resistance in
accordance with Table1 & without mechanical damage,after allowing
the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
Vibration Test:
The Units are measured for its frequency and resistance in
accordance with Table 1&without mechanical damage afer
subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz
frequency sweep 20 times.
Sealing Tightness:
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and
reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in
accordance with Table 1 after dipping into molten solder with the
temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point
2.0mm from the base root.
Product specification
| Type | 2520 |
| Frequency Range(MHZ) | 26.000MHZ |
| Frequency Tolerance(at25℃) | ±10PPm ,±5PPm at25℃+/-2℃ |
| Frequency Stability vs. Temp(FL-T) | ±10PPm,±20PPm ,±30PPm |
| Operating Temperature range | -20~+70℃ -40~+85℃ |
| Storage Temperature range | -45~+80℃ |
| Temperature Characteristics | ±10PPm ±20PPm |
| Load Capacitance | 8 to 20 Pf or Serles |
| Aging | ±3 PPm/year |
| Insulation Resistance | 500MΩ(DC100V±15V) |
Dimension
Refluence examination
Frequency change:≤±5ppm
5 , product advantage
The new Tianyuan in R & D, design, manufacturing, marketing and
service as a whole, have a hundred grade purification workshop. The
international advanced automated production lines, special test
equipment, the latest technology and professional and technical
personnel; has been preparing for the new Tianyuan own industrial
park, to further expand the research and production of the higher
requirements of the product.
6 , FAQ
Packing
3000pcs/tape.
Samples and technical support can be provided free of charge.
