SMD crystal Oscillator 2016 16.000MHZ High Precision Small Size
product application
1 , 2.4G Bluetooth module
2 , Car reversing radar, navigation
3 , Bluetooth headset
product features
Passive crystals require an oscillator in the DSP chip, and there
is a recommended connection method on the datasheet. No passive
crystal voltage, the signal level is variable, that is, according
to the oscillation circuit to decide, the same crystal can be
applied to a variety of voltage, can be used for a variety of
different clock signal voltage requirements DSP.
Standard Environmental Condition:
Environmental Temperature:15℃~35℃
Humidity:45%~85%
Atmospheric pressure:86~106KPa
Operating Temperature Range:-20℃~70℃
Crystal Frequency & Resistance will be tested under the following
conditions,
Unless extra requirments:
standard temperature(25±2℃) after heat balance.
Storage Temperature Range:-40℃~+85℃
Mechanical test:
The quartz crystal unit shall be subjected to normal atmospheric
conditions for 1hr before being tested.
Dropping Test:
The Units are measured for its frequency and resistance in
accordance with Table1 & without mechanical damage,after allowing
the crystal to fall freely.
From 75 cm of height 3 times on the firmed wood.
Vibration Test:
The Units are measured for its frequency and resistance in
accordance with Table 1&without mechanical damage afer
subjectiong to 2hrs of vibration with 0.75mm amplitude with 10~55Hz
frequency sweep 20 times.
Sealing Tightness:
Find Lead Test:≤1×10-8atm·cc/S by Helium mass-mass-spectrometer detector,and vacuum and
reach 1×10-3Pa；
Resistance to Soldering Heat:
The Units are measured for its frequency and resistance in
accordance with Table 1 after dipping into molten solder with the
temperature of 320℃±10℃；For 3~4 secs and at a depth up to a point
2.0mm from the base root.
product advantage
High Quality Produce with SGS ,ROHS(JDS OR OEM ) ;
High production capacity;
Professional Electronics Components supplier and over 17 experience
TECH
Advanced production line and test equipment from USA,JP,etc.
Product specification
| Type | SMD2016 |
| Frequency Range(MHZ) | 16.000MHZ |
| Frequency Tolerance(at25℃) | ±10PPm ,±5PPm at25℃+/-2℃ |
| Frequency Stability vs. Temp(FL-T) | ±10PPm,±20PPm ,±30PPm |
| Operating Temperature range | -20~+70℃ -40~+85℃ |
| Storage Temperature range | -45~+80℃ |
| Temperature Characteristics | ±10PPm ±20PPm |
| Load Capacitance | 8 to 20 Pf or Serles |
| Aging | ±3 PPm/year |
| Insulation Resistance | 500MΩ(DC100V±15V) |
Dimension
Refluence examination
Frequency change:≤±5ppm
FAQ
Packing
3000pcs/tape.
Samples and technical support can be provided free of charge.
